ผู้ติดต่อของฉัน
เลือกตำแหน่งที่ตั้ง

หลังจากเลือกรหัสไปรษณีย์ของคุณแล้ว เราจะกำหนดให้เจ้าหน้าที่ที่เกี่ยวข้องให้บริการคุณโดยทันที

iglidur® I3-PL, SLS material

  • High wear-resistance and maximum stability
  • Good mechanical properties
  • Accurate in every detail with exact surfaces
  • For sliding applications and gears
  • Predictable service life of gears
  • Can be processed with suitable commercially available laser sintering materials
รายละเอียดผลิตภัณฑ์
Selective laser sintering (SLS) material: iglidur® I3-PL

The iglidur® I3-PL material, specially developed for laser sintering, showed an abrasion resistance 3 to 30 times better than conventional materials for laser sintering in the tribological tests in the igus® test laboratory. This further increases the degrees of freedom in the design of sliding components subject to wear and tear. It is used  for any  sliding applications, as well as rollers, racks, spur gears and bevel gears.

When do I need it?
  • For all types of applications where low friction and high wear resistance are important
  • When an easy to process laser sintering material with high strength is required
  • When components with high mechanical strength are required, in particular spur gears, bevel gears, drive nuts, special slides and spherical bearings
  • Very good wear properties with anodised aluminium as a counter partner
When do I not need it?
ข้อมูลทางเทคนิค
ดาวน์โหลด

ที่ปรึกษาและการสนับสนุน

เรายินดีให้คำปรึกษากับคุณ

จัดส่งและให้คำปรึกษา

ในบุคคล:

วันจันทร์ถึงวันศุกร์ตั้งแต่เวลา 8.30 น. - 5.30 น.

Online:

24h

The terms "igus", "Apiro", "CFRIP", "chainflex", "conprotect", "CTD", "drygear", "drylin", "dryspin", "dry-tech", "easy chain", "e-chain", "e-chain systems", "e-loop", "e-ketten", "e-kettensysteme", "e-spool", "e-skin", "flizz", "ibow", "igear", "iglidur", "igubal", "kineKIT", "manus", "motion plastics", "pikchain", "plastics for longer life", "print2mold", "readycable", "readychain", "ReBeL", "robolink", "speedigus", "tribofilament", "triflex", "xirodur" and "xiros" are legally protected trademarks of the igus® GmbH/Cologne in the Federal Republic of Germany, and, where applicable, in some foreign countries. igus® GmbH points out that it does not sell any products of the companies Allen Bradley, B&R, Baumüller, Beckhoff, Lahr, Control Techniques, Danaher Motion, ELAU, FAGOR, FANUC, Festo, Heidenhain, Jetter, Lenze, LinMot, LTi DRiVES, Mitsubishi, NUM, Parker, Bosh Rexroth, SEW, Siemens, Stöber and all other drive manufacturers mentioned on this website. The products offered by igus® are those of igus® GmbH.