iglidur® JPF, sleeve bearing, mm - JPFSM

iglidur® JPF | The versatile endurance runner
The iglidur® JPF plain bearings are characterised above all by extremely low coefficient of friction in dry operation and their very low stick-slip tendency. With a maximum recommended surface pressure of 35MPa, iglidur® JPF plain bearings are not suitable for extreme loads.

Typical application areas

Vending machinery
Printing industry
Beverage industry
Aviation
Cleanrooms

You can find further application areas here:
Industry solutions
 

When to use it? For high speeds When highest wear resistance at low to medium pressures is required Low wear against different shafts When a low coefficient of friction in dry operation is requested For vibration dampening When good chemical resistance is required For best performance with soft shaft materials Low humidity absorption

When not to use it? When high compressive strength occurs iglidur® GPF, sleeve bearing, mm iglidur® W360, sleeve bearing, mm When short-term temperatures exceed +120°C iglidur® GPF, sleeve bearing, mm iglidur® Z, sleeve bearing, mm When a cost-effective bearing for occasional movements is required iglidur® GPF, sleeve bearing, mm

Use our filter options to find the suitable product

Tolerances and measuring system
The installation dimensions and tolerances of the iglidur® bearings depend on the material and wall thickness. Moisture absorption and thermal expansion are decisive for the material. Plain bearings with low moisture absorption can be designed with a minimal amount of bearing clearance. The following applies to the wall thickness: The thicker the bearings, the greater the bearing clearance must be.
Test procedure

Installation
iglidur® bearings are press-fit bearings. The inner diameter is only adjusted to the appropriate tolerance after pressing into the housing bore. The press-fit interference can be up to 2% of the inside diameter. This ensures the secure press-fitting of the bearing. Axial or radial displacements in the housing are thus reliably avoided.
iglidur® - installation, bonding, machining