iglidur® M250, thrust washer, imperial - M250TI

iglidur® M250 | The robust all-rounder with outstanding vibration damping
 

• Over 450 dimensions from stock
• Excellent vibration dampening
• Resistant to edge pressure
• High impact resistance
• Thick walled according to DIN 1850
• Dirt can become embedded for shaft protection
• Lubrication and maintenance-free

The self-lubricating plain bearings made of iglidur® M250 are characterised by impact strength, vibration damping and wear resistance. They prove themselves particularly well under stresses in which the vibration damping of the bearings is required, e.g. in sports equipment and packaging machines. Since they are also capable of embedding dirt, they are also well suited in agricultural machinery and gardening equipment.

Typical application areas

Agricultural engineering
Mechanical engineering
Furniture / industrial design
Textile industry

Here you will find further possible applications:
Industry solutions
 

When to use it? When the bearings are exposed to severe dirt When high vibration dampening is necessary For low to medium speeds When mechanical reaming of the bore is necessary Resistant to edge pressure High impact resistance Thick walled according to DIN 1850

When not to use it? For applications in wet areas iglidur® H, sleeve bearing, mm When very high precision is required iglidur® P, sleeve bearing, imperial For very smooth shafts iglidur® J, sleeve bearing, imperial If a cost-effective bearing with maximum wear resistance is sought iglidur® R, sleeve bearing, imperial

Use our filter options to find the suitable product

Tolerances and measuring system
The installation dimensions and tolerances of the iglidur® bearings depend on the material and wall thickness. Moisture absorption and thermal expansion are decisive for the material. Plain bearings with low moisture absorption can be designed with a minimal amount of bearing clearance. The following applies to the wall thickness: The thicker the bearings, the greater the bearing clearance must be.
Test procedure

Installation
iglidur® bearings are press-fit bearings. The inner diameter is only adjusted to the appropriate tolerance after pressing into the housing bore. The press-fit interference can be up to 2% of the inside diameter. This ensures the secure press-fitting of the bearing. Axial or radial displacements in the housing are thus reliably avoided.
iglidur® - installation, bonding, machining