โปรดเลือกที่อยู่การจัดส่ง

การเลือก ประเทศ/ภูมิภาค อาจส่งผลต่อปัจจัยต่างๆ เช่น ราคา ตัวเลือกการจัดส่งและความพร้อมจำหน่ายสินค้า
ผู้ติดต่อของฉัน
IGUS MOTION PLASTICS (THAILAND) CO., LTD.

1340 Soi Bangkok-Nonthaburi 30, Bangkok-Nonthaburi Rd.,

Bangsue, Bangsue

Bangkok 10800 Thailand

+66 (0)2 587 4899
+66 (0)2 587 4898
TH(TH)

twisterband

Installation guide for twisterband

TPE outer jacket

Dimensioning: Cable selection

When selecting cables, pay particular attention to good abrasion and gliding properties. An ideal jacket material is TPE.
Recommendation: chainflex® cable CF9
Special shielded cables for the use in twisterband are in preparation. Please contact us if the use of shielded cables is essential

Dimensioning: Filling

twisterband-Version with lock:
TB20.44.18.x.01.0 | TB30.75.22.x.01.0

A = separate cables with crossbars
 
B = Insert cables sorted according to diameter or bending radius. Insert thin, small ones inward – then increasingly bigger ones outward.
 

 

C = Not more than two cables on top of each other. 10% of the larger diameter or a minimum of 1 mm between all cables
 

 

 
D = 10% of the larger diameter or a
minimum of 1 mm between all cables
 

E = 10% of the larger diameter or a
minimum of 1 mm between all cables and separators

twisterband version with easy locking:
TB12.23.09.x.01.0 | TB20.44.12.x.01.0


A = insert cables sorted according to diameter or bending radius. Insert thin, small ones inward – then increasingly bigger ones outward.
 

 

 
B = A minimum of 1 mm or 10% of the larger diameter => Ø B between all cables
 

 

 

 

C = Not more than 2 cables on top of each other. A minimum of 1 mm or
10% of the larger diameter between all cables

Assembly: Mounting brackets

1. Insert twisterband between the steel parts.
2. Secure the twisterband by screwing the mounting bracket in place.

Assembly: guide shaft

Insert a centric shaft as a guide for vertical installation orientations starting at 1500° rotation angles.
Generally, insert a centric shaft as support for horizontal installation orientations.

Assembly: Strain relief

- Strain relief the cables on both ends
- Ensure that the cable tie lock does not point in the direction of the energy chain

Final position:

The twisterband must not be twisted up to the end. To avoid excessive strain on the cables, a min. reserve of 90° must be planned in front of each mounting point.

twisterband®

Installation videos

Part 1
Part 2
Part 3


เงื่อนไข "Apiro", "AutoChain", "CFRIP", "chainflex", "chainge", "รางสำหรับเครน", "ConProtect", "cradle-chain", " ;CTD", "drygear", "drylin", "dryspin", "dry-tech", "dryway", "รางแบบง่าย", "e-chain®", " ระบบ e-chain® ", "e-ketten", "e-kettensysteme", "e-loop", "energy chain", " ระบบ energy chain ", "Enjoyneering", "e-skin", "e-spool", "fixflex", "flizz", "i.Cee", "ibow", "igear" , "iglidur", "igubal", "igumid", "igus", "igus พัฒนาการเคลื่อนที่", "igus:bike", "igusGO", "igutex", "iguverse" , "iguversum", "kineKIT", "kopla", "manus", "motion plastics", "motion polymers", "motionary", "พลาสติกเพื่ออายุการใช้งานที่ยาวนานขึ้น", "print2mold" , "Rawbot", "RBTX", "readycable", "readychain", "ReBeL", "ReCyycle", "reguse", "robolink", "Rohbot", "savfe" , "speedigus", "superwise", "ใช้งานแบบแห้ง", "tribofilament", "triflex", "twisterchain", "เมื่อมันเคลื่อนที่ igus จะพัฒนา", "xirodur", " Xiros " และ "ใช่" เป็นเครื่องหมายการค้าที่ได้รับการคุ้มครองตามกฎหมายของ igus® GmbH/ Cologne ในสหพันธ์สาธารณรัฐเยอรมนี และในกรณีที่มีผลบังคับใช้ในต่างประเทศบางประเทศ นี่เป็นรายการเครื่องหมายการค้าโดยย่อ (เช่น อยู่ระหว่างดำเนินการยื่นขอเครื่องหมายการค้าหรือเครื่องหมายการค้าจดทะเบียน) ของ igus® GmbH หรือบริษัทในเครือของ igus® ในเยอรมนี สหภาพยุโรป สหรัฐอเมริกา และ/หรือประเทศหรือเขตอำนาจศาลอื่นๆ

igus® GmbH ไม่ได้จำหน่ายผลิตภัณฑ์ใดๆ ของบริษัท Allen Bradley, B&R, Baumüller, Beckhoff, Lahr, Control Techniques, Danaher Motion, ELAU, FAGOR, FANUC, Festo, Heidenhain, Jetter, Lenze, LinMot, LTi DRiVES, Mitsubishi, NUM, Parker, Bosch Rexroth, SEW, Siemens, Stöber และผู้ผลิตไดร์ฟอื่น ๆ ทั้งหมดที่ระบุไว้ในเว็บไซต์นี้ ผลิตภัณฑ์ที่นำเสนอโดย igus® เป็นของบริษัท igus® GmbH